DIY LED Ring Light
For years, I have relied on artificial lighting for my portraits and photos, and this DIY ring light I made is so helpful.
Since I made the tutorial for this light ages ago, I wanted to update the tutorial and links (some are no longer available). If you're ready, I'll show you how I made my ring light, and yes, it's still standing strong today. I also made an LED Light Panel for another space-saving lighting solution!
This post contains affiliate links. That means if you use my link, I make a small commission at no extra cost to you. As always, thank you for your support.
WHY DIY LIGHTING
This Ring Light is great if you don't want to spend a ton of money on good lighting. Ring Lights can be expensive, and I figured why not just make it instead. Bonus: the ring light doesn't heat up much, which is nice for long filming sessions.
Materials You'll Need:
- 14" Wood Hoop ($6.84) for embroidery (with 2 hoops, one larger and one smaller with a clamp to attach them together) like this
- 14" Wide Wood Floral Base ($6.29) like this
- LED Strip Lights ($9.99) Cool White (5000K), 16.4 ft. like this
- DC Adapter ($9.85) for LED Strip Lights (12V for US) like this
- Mod Podge ($6.99) like this (matte finish would be better than the gloss I used)
- Rust-Oleum Metallic Silver Spray Paint ($4.15 or $3.86) like this 0r this
- Sponge Brush ($4.13) like this
- Hot Shoe Mount ($5.50) like this
- Wooden Block (???) check your local craft store or dollar store. I used a toy block that was just lying around.
- Round Mirror ($3.89) like this
If you want to create a Ring Light Mirror (great for putting on makeup!), you can glue a round mirror on the inside of the wood hoop. The lights will reflect off the mirror and light up your face evenly for stellar makeup application.
- Drill with 1/4" bit
- Extension cord - the DC Adapter for the LED light is rather short